Page 1 |
Previous | 1 of 3 | Next |
|
small (250x250 max)
medium (500x500 max)
Large
Extra Large
large ( > 500x500)
Full Resolution
All (PDF)
|
This page
All
|
Oklahoma Department of Labor Safety Standards Division Air Inflatable Amusement Ride/Device Inspection Criteria Revision 6 April 12, 2011 The following criteria is provided to augment the minimum requirements of the manufacturer’s guidelines for Inflatable type amusement devices. These criteria have been developed based on a review of manufacturer’s requirements, and the ASTM F-24 (F 2374-06) . Each owner, manager or operator who provides for public use and operation Inflatable Amusement Rides/ Devices, for the purpose of providing amusement, thrills or excitement shall abide by these criteria. NOTE: ALL INFLATABLE AMUSEMENT RIDES/ DEVICES SHALL BE ERECTED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURER’S GUIDELINES UNLESS IT IS DETERMINED BY THE COMMISSIONER OF LABOR THAT THE MANUFACTURER’S GUIDELINES DO NOT PROVIDE FOR THE ADEQUATE PROTECTION OF THE GENERAL PUBLIC. NO INFLATABLE DEVICES SHALL BE OPENED TO THE PUBLIC BEFORE THE ANNUAL INSPECTION HAS BEEN PREFORMED FOR THE CALENDER YEAR, NO EXCEPTIONS. Ride Design 1. All Inflatable devices shall meet the requirements as outlined in ASTM- F24 (F 2374-06). 2. Toy grade Inflatable devices SHALL NOT be used for rental/commercial purposes, NO EXCEPTIONS. 3. All Inflatable devices purchased for rental/commercial purposes to be used in Oklahoma after January 1, 2007 shall meet the flame resistant requirements outlined in ASTM F 24 (F 2374-06) Standard Practice for Design, Manufacture, Operation and Maintenance of Inflatable Amusement Devices (5.5.1). Tie Downs 1. All air supported devices shall be anchored per manufacturer’s requirements. In some cases, the manufacturer’s recommendations may be deemed inadequate. In those cases, the device shall be provided with suitable additional securing devices, determined by the ODOL inspector onsite.. 2. All ground stakes/anchors shall be of sufficient diameter and length to prevent movement of the device at the maximum allowed operational wind speed. Different soil conditions may require different diameter and length stakes be available. “NOTE” 8 to 10 inch, 1/4 diameter stakes (commonly call tent stakes) provided by some manufactures are NOT ALLOWED for use in Oklahoma. 3. No more than two tie down ropes shall be attached to any one stake/anchor, outdoors locations only. “NOTE” this does not apply when anything other than ground stakes are utilized i.e.: sand bags, water barrels 4. On outdoor locations ALL tie downs shall be utilized, No Exceptions.
Object Description
Okla State Agency | Labor, Oklahoma Department of |
Okla Agency Code |
'405' |
Title | Air inflatable amusement ride/device inspection criteria |
Alternative title | SSD AR inflatable guidelines |
Authors | Oklahoma. Department of Labor. |
Publisher | Oklahoma Department of Labor |
Publication Date | 2011-04-12 |
Publication number | 2011-08-23 |
Frequency | Irregular |
Publication type |
Laws/Rules |
Subject | Amusement rides--Standards--Oklahoma. |
Purpose | The following criteria is provided to augment the minimum requirements of the manufacturer's guidelines for Inflatable type amusement devices. These criteria have been developed based on a review of manufacturer's requirements, and the ASTM F-24 (F2374-06). Each owner, manager or operator who provides for public use and operation Inflatable Amusement Rides/Devices, for the purpose of providing amusement, thrills or excitement shall abide by these criteria. |
OkDocs Class# | L400.1 A298i rev6 4/12/2011 |
Digital Format | PDF, Adobe Reader required |
ODL electronic copy | Filed with documents.ok.gov submissions system |
Rights and Permissions | This Oklahoma state government publication is provided for educational purposes under U.S. copyright law. Other usage requires permission of copyright holders. |
Language | English |
Date created | 2012-08-13 |
Date modified | 2012-08-13 |
OCLC number | 890220093 |
Description
Title | Page 1 |
Full text | Oklahoma Department of Labor Safety Standards Division Air Inflatable Amusement Ride/Device Inspection Criteria Revision 6 April 12, 2011 The following criteria is provided to augment the minimum requirements of the manufacturer’s guidelines for Inflatable type amusement devices. These criteria have been developed based on a review of manufacturer’s requirements, and the ASTM F-24 (F 2374-06) . Each owner, manager or operator who provides for public use and operation Inflatable Amusement Rides/ Devices, for the purpose of providing amusement, thrills or excitement shall abide by these criteria. NOTE: ALL INFLATABLE AMUSEMENT RIDES/ DEVICES SHALL BE ERECTED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURER’S GUIDELINES UNLESS IT IS DETERMINED BY THE COMMISSIONER OF LABOR THAT THE MANUFACTURER’S GUIDELINES DO NOT PROVIDE FOR THE ADEQUATE PROTECTION OF THE GENERAL PUBLIC. NO INFLATABLE DEVICES SHALL BE OPENED TO THE PUBLIC BEFORE THE ANNUAL INSPECTION HAS BEEN PREFORMED FOR THE CALENDER YEAR, NO EXCEPTIONS. Ride Design 1. All Inflatable devices shall meet the requirements as outlined in ASTM- F24 (F 2374-06). 2. Toy grade Inflatable devices SHALL NOT be used for rental/commercial purposes, NO EXCEPTIONS. 3. All Inflatable devices purchased for rental/commercial purposes to be used in Oklahoma after January 1, 2007 shall meet the flame resistant requirements outlined in ASTM F 24 (F 2374-06) Standard Practice for Design, Manufacture, Operation and Maintenance of Inflatable Amusement Devices (5.5.1). Tie Downs 1. All air supported devices shall be anchored per manufacturer’s requirements. In some cases, the manufacturer’s recommendations may be deemed inadequate. In those cases, the device shall be provided with suitable additional securing devices, determined by the ODOL inspector onsite.. 2. All ground stakes/anchors shall be of sufficient diameter and length to prevent movement of the device at the maximum allowed operational wind speed. Different soil conditions may require different diameter and length stakes be available. “NOTE” 8 to 10 inch, 1/4 diameter stakes (commonly call tent stakes) provided by some manufactures are NOT ALLOWED for use in Oklahoma. 3. No more than two tie down ropes shall be attached to any one stake/anchor, outdoors locations only. “NOTE” this does not apply when anything other than ground stakes are utilized i.e.: sand bags, water barrels 4. On outdoor locations ALL tie downs shall be utilized, No Exceptions. |
Date created | 2012-08-13 |
Date modified | 2012-08-13 |