Where to start?How will I recognize an emissions unit?
An emission release point
At least one process that produces air emissions
One or more pollutants
2011 Emissions Inventory Workshop 2
Omissions in Emissions!
2011 Emissions Inventory Workshop 3
•
Obvious emission units:engine, tanks, furnace
•
Not so obvious:Upset and start ups, fugitive leaks, solvent use, haul roads/fugitive dust sourcesRegulations
Oklahoma Administrative Code(OAC) 252:100
Subchapter 5 –Emissions Inventory
Permit Exempt and De Minimus Facilities
not required to submit
Subchapter 7 –Minor Permits
Subchapter 8 –Major Permits
2011 Emissions Inventory Workshop 4
Resources
2011 Emissions Inventory Workshop 5
•
Oklahoma DEQ Website http://www.deq.state.ok.us/
•
EPA’S Clearinghouse for Inventories& Emission Factors http://www.epa.gov/ttn/chief/index.html
ANDYour Air Permit
2011 Emissions Inventory Workshop 6
I . FACILITY DESCRIPTION II. PROCESS DESCRIPTIONIII . EQUIPMENTIV. AIR EMISSIONSV. INSIGNIFICANT ACTIVITIES
VI.
OKLAHOMA AIR POLLUTION CONTROL RULES
VII.
FEDERAL REGULATIONS
VIII.
COMPLIANCE
IX.
SUMMARY
Permit Memorandum Sections
2011 Emissions Inventory Workshop 7
•
Permit writer includes initial application data
•
Emission calculations and referenced sources
•
Normally lists the acceptable Emission Factors
Your Permit Memorandum
2011 Emissions Inventory Workshop 8
Thepermit memorandum is not the final word for Emission Inventories
The permit may list some processes as:
But Beware ! 2011 Emissions Inventory Workshop 9
2011 Emissions Inventory Workshop 10
Specific Conditions•
Emission Units and Processes
•
Emission Factors
•
Emission Limits
•
Design Capacity for engines, boilers and turbines
•
Stack or Emission Release data
•
Permitted pollutants
•
ControlsEmission Units
2011 Emissions Inventory Workshop 12
2011 Emissions Inventory Workshop
13
Multiple ProcessesWithin an Emissions Unit
TANKS: if over 5 tons of emissions –separate breathing, working and flashing losses
ANY EQUIPMENT that utilizes different Process Material (coal, wood, natural gas)
2011 Emissions Inventory Workshop 14
Multiple Processes
2011 Emissions Inventory Workshop 15
2011 Emissions Inventory Workshop 16
Specific Conditions Section
2011 Emissions Inventory Workshop 17
EMISSION FACTORS
2011 Emissions Inventory Workshop 18
What Is An Emission Factor?
2011 Emissions Inventory Workshop 19
An emission factor is a representative value that attempts to relate the quantity of a pollutant released to the atmosphere with an activity associated with the release of that pollutant.Emissions = EF x Process RateThese factors are usually expressed as the weight of pollutant divided by a unit weight, volume, distance, or duration of the activity emitting the pollutant.Is an Emission Factor Needed?
Storage Tanks -use the Software TANKS
Landfills -use LANDGEM, a gas emissions model
Tank Flashing -Vasquez-Beggsequation
Glycol Dehydrator Reboiler -GRI-GLYCalc
These are models
with formulas using multiple variables.
There is no single emission factor. 2011 Emissions Inventory Workshop 20
Sometimes it is as easy as this…
2011 Emissions Inventory Workshop 21
Stockpiles
2011 Emissions Inventory Workshop 22
Fugitive Emissions
2011 Emissions Inventory Workshop 23
Alternate EF Sources
.
AP 42, Fifth EditionCompilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources
WebFIRE
http://cfpub.epa.gov/webfire/index.cfm
Stack Testing 2011 Emissions Inventory Workshop 24
252:100-5-2.1. Emission inventory
(d) Method of calculation. The best available data at the time the emission inventory is or should have been prepared shall be used to determine emissions
2011 Emissions Inventory Workshop 25
EMISSION LIMITS
2011 Emissions Inventory Workshop 26
DESIGN CAPACITY
2011 Emissions Inventory Workshop 27
From Specific Conditions:
From Permit Memorandum:EMISSION RELEASE POINTPARAMETERS
2011 Emissions Inventory Workshop 28
Sometimes listed in the Permit
2011 Emissions Inventory Workshop 29
EMISSIONS
What should be reported?
AllActual Emissions
not
Permit limits
or
Potential to Emit Values
2011 Emissions Inventory Workshop 30
2011 Emissions Inventory Workshop 31
If a process emits pounds or more of a regulated air pollutant(≥ 0.001 tons)
Please Report Them!!
Trace (<0.001 TPY):Use the Trace check box to indicate annual emissions have been calculated but are less than 0.001 Tons (2.0 lbs).A Control Device as anEmission Unit
2011 Emissions Inventory Workshop 32
Controls
2011 Emissions Inventory Workshop 33
Summary ……
Look to your PERMIT to CREATE or REVIEW your EMISSIONs INVENTORY
2011 Emissions Inventory Workshop 34
Pay special attention to your SPECIFIC CONDITIONS
2011 Emissions Inventory Workshop 35
Emission Units
EmissionFactors
Controls2011 Emissions Inventory Workshop 36
•
Emission Inventory Regulation Requirements MAY DIFFER from Permit
REPORTRegulated Pollutantsover 2 pounds
Even if permit
considers the process
insignificant2011 Emissions Inventory Workshop 37
•
Report your ACTUAL EMISSIONS
Not Permit Limits
Actual EmissionsCall us if you have any question about using your permit and building your inventory.
2011 Emissions Inventory Workshop 38
aei@deq.ok.govmorris.moffett@deq.ok.govrobert.eddington@deq.ok.govmark.gibbs@deq.ok.gov michelle.horn@deq.ok.gov carrie.schroeder@deq.ok.gov john.munro@deq.ok.gov